The ULTIMATE switch and splitter for your TOSLINK digital audio equipment!
Simultaneously switch and/or split up to four TOSLINK Digital Optical Audio signals between four compatible receivers or sound systems. Supporting Dolby Digital DTS sound formats and uncompressed PCM audio in crystal clear digital transmission!
If you need the best in audio quality, the best way to do it is with an optical TOSLINK cable. But many entry-level and consumer-grade amplifiers / home theatre systems only have a single input to utilise - and you might have more than one source device! Well, don't go tearing your hair out, because a solution is at hand.
This TOSLINK Optical True Matrix Switch is fully powered, sporting no less than four inputs which can be sent to either of four outputs simultaneously. This is great for two reasons: One; with a powered device you can be assured of full signal strength at all times for longer cable runs. And two; having four outputs gives you the freedom to hook up to amplifiers, speakers, headphones and soundbars and never worry about swapping cables again. As a true matrix, it offers full switching and splitting; capable of routing any of the four inputs to either of the outputs!
Make no mistake; this is an elite unit for elite power users who need absolute optical flexibility.
Inputs and Outputs include:
- INPUTS: 4x TOSLINK Optical
- OUTPUTS: 4x TOSLINK Optical
- 4x4 True-Matris TOSLINK Switch & Splitter
- Supports all TOSLINK audio formats (5.1ch / Dolby DTS / Dolby AC3 / LPCM)
- Baud Rate: 100Mbps
- Peak wavelength: 650nm
- Output cable distance: Up to 40m (when using optical cable with less than 0.2Db/m loss)
- Dimensions: 190(L) x 90(W) x 25(H) mm
- Weight: 600g
This elite device features:
- Cable Chick 12 Month Warranty!
- Switch between up to 4 inputs, using up to 2 at once
- Split any input to up to four outputs simultaneously
- Fully powered with signal repeating chipset
- Push-button and remote control switching
- Full 5.1 & 7.1 channel audio support
- Works with TOSLINK / Optical SPDIF
- Works with Mini-Toslink via adapters (not included)
- Colour: Silver metal casing
Why shop with Cable Chick
- Australia's leading retailer of AV cables and tech accessories
- Flat-rate shipping nation wide
- Secure online shopping 24/7
- 14 years experience with 1000's of health, government & education clients
- ALL products locally stocked for same-day dispatch
- Industry leading warranties up to 5-years on products
- A customer base of over 250k+ Australians who trust Cable Chick
- Proudly to be 100% Australian, employing all local staff
Posted: 5th Feb, 2015
I have two aplifiers that I want to connect 5 sets of speakers around the house. Is this box 4x2 Fibre Optic TOSLINK True Matrix Switch with Remote
suitable for this?
Currently I have 1 amplifier connected to the speakers via a standard A, B, C switch box?
"Yes. The matrix would be able to connect up to four media players (source devices) and send their audio to both of the amps in practically any configuration. It would then be up to the Amps themselves to send audio data to each set of speakers/zone."
Posted: 4th March, 2015
Does it support mpeg audio from Foxtel IQ2?
"Yes. It supports all standard optical audio formats. The codec of the original source is not a determining factor in optical audio format."
Posted: 4th March, 2015
Does this have an ir remote for switching or is it only manual??
"Yes. It has both Push-Button and Remote-Control switching."
Have a question about this product?