Avencore 8K DisplayPort 3-Way Splitter Hub - MST Hub (Extend & Mirror)

This compact 3-port DisplayPort Splitter hub is intended for the beefiest of PCs and Gaming laptops, and is capable of handling one 8K@30Hz display, two 4K@60Hz displays, or three 4K@30Hz displays simultaneously. Lower combined resolutions, such as 1440p or 1080p will increase the available bandwidth and improve refresh rates. Eg: 2x 1080p@240Hz

Enjoy your choice of a mirrored/cloned desktop, or an extended desktop by utilising the magic of Multi-Stream Transport (MST) on DisplayPort v1.4 hardware. This HBR3 (High Bit-rate 3) compatible MST Hub supports both video and audio for a truly immersive computer experience for resolution combinations under 32Gbps total bandwidth.

10 centimetres of flex cable to the MST Hub gives you clearance to avoid other sockets at the back of your PC or laptop. A Micro-USB cable is required to provide power to the MST, and should be attached to a powered USB socket which can deliver at least 5V/1A power (may not be suitable for some laptops on battery power).

Note: For maximum compatibility, a discreet ATI or Nvidia graphics card is recommended. Intel HD and other intergrated graphics or APU chipsets like those found in tablets or entry-level notebooks are not likely to be powerful enough to operate all three sockets at maximum resolution or refresh rate.

Setup Instructions

1. Connect the Male DisplayPort end to the DP++ compatible socket on your computer
2. Using a Micro USB Cable (sold separately), connect the Mini-DisplayPort MST Hub to a powered USB port (a computer, TV or a wall socket USB charger will do)
3. Connect from each output on the MST Hub to each of your screens using quality DisplayPort Cables
4. Now your connection is set up, simply configure the displays via your computer's display properties

A Micro-USB 5V/1A connection is required for additional power (Micro-USB cable not included)

Mac-OS Supports only SST (split-mode). Extended desktop MST mode is not available on DisplayPort v1.1 or Mac OS based hardware.

Intended for use with DisplayPort monitors. HDMI compatibility through DP++ Alternate Modes is not guaranteed, and results may vary depending on your hardware.

Product Specifications:

• 2 Year Avencore Warranty
• 10cm Male DisplayPort Male to 3 x female DisplayPort sockets
• Supports Mirroring and Extended Desktop Modes
• Can be used with a Mini-DisplayPort to DisplayPort Adapter for compatibility on Mini-DP Sockets
• Micro-USB socket for additional 5V/1A power (cable not included)
• 32 Gbps Data tranfer rate (HBR3)
  
• Full Support for HDCP v1.3 and DPCP (Display Port Content Protection)
• Audio formats up to 24bit / 192KHz supported
• Hub Dimensions: 105 x 44 x 18 mm (excluding cable)
• Colour: Black
  

*Hardware Note: Your existing video graphics adapter must meet the DisplayPort hardware specifications you intend to use for this splitter to perform all its functions. Older graphics cards or mobile graphics chipsets not capable of MST will not be compatible with this splitter.