Wireless HDMI? Yes please! 4K support? Perfect!
The tech is finally here to send Ultra HD (3840 x 2160) HDMI signals wirelessly across the room! It's like magic! There's a claimed supported transmission distance of up to 50m (line of sight), but keep in mind that this is a theoretical maximum. We've found in testing the best results are in the 10-25m range line-of-sight, and 5-15m through walls - depending on their construction etc. Of course, the installation environment and type of wall construction will play a large role in final transmission distances and streaming quality, but if you need to transmit a HDMI signal without cables, this is definitely the way to go!
Important Note About Wireless HDMI Transmission
Straight up, we need to make clear that ALL wireless HDMI signal transmissions WE have seen were inferior to a conventional cabled connection. Some latency, lag and even a drop-out can be common depending on how good the WiFi signal is. This unit automatically channel-hops when it detects a problem, but it can't make a good signal out of a bad one. Depending on the final set up environment (distances, obstructions etc), you may notice varying degrees of image compression, jitter, hitches and/or some delay from the source device. For this reason, we do not recommend any wireless HDMI sender/receiver product for gaming, or critical applications.
Perfect for Digital Signage, Presentations, boardrooms and Remote Displays
This digital dual-mode 2.4GHz/5GHz Wireless HDMI Sender & Receiver dongle kit provides wireless digital transmission of HDMI audio & video signals including 1080p/60Hz and 4K/30Hz. All you need is power at both ends (via included USB-A to USB-C cables), but you won't need a HDMI cable.
Setup is a cinch, as you simply need to connect the Sender (TX) unit to your source HDMI device, and connect the Receiver (RX) unit to your display. Finally, you press the pairing button on the transmitter and wait a little for it to link up. Pressing the button on the receiver will rotate the display through 90 degree increments.
Not recommended for use with Foxtel set top boxes.
Featuring:
- 12 Month Cable Chick Replacement Warranty
- HDMI Wireless Sender & Receiver Package (up to 4K@ 30Hz)
- Wireless HDMI Transmission of 50m+ (varies depending on install environment)
- No HDMI cable required (USB power cables included)
- 2.4GHz + 5GHz Dual-Band Direct Transmission
- No Wi-Fi, Internet, Drivers or Software required for direct transmission
- Note: Some image compression and lag will be noticeable depending on transmission distances
Why shop with Cable Chick
- Australia's leading retailer of AV cables and tech accessories
- Flat-rate shipping nation wide
- Secure online shopping 24/7
- 14 years experience with 1000's of health, government & education clients
- ALL products locally stocked for same-day dispatch
- Industry leading warranties up to 5-years on products
- A customer base of over 250k+ Australians who trust Cable Chick
- Proudly to be 100% Australian, employing all local staff
Posted: 2nd March, 2015
Question:
Is it possible to have 1 sender and 2 receivers? or is it possible to use the pass through of one unit to go in to a transmitter of a second unit. If you do that, is there a delay? Thinking of this for a digital signage application to 2+ TV's?
Answer:
"Yes, it is possible to have multiple receivers, but unfortunately they are not available to us separately. You could definitely daisy-chain multiple units as well, but there could be some delay due to the nature of wireless HDMI. We haven't tested this, but we expect it would be less than a second offset."
Posted: 29th Jan, 2016
Question:
Does this Extender support High Definition Audio formats? Greater than 5.1 channels?
Answer:
"This HDMI Wireless Sender / Receiver supports High Definition audio up to 5.1 surround sound."
Posted: 18th July, 2016
Question:
Hi
Does this work with a PC / laptop source with a hdmi port ?
Thanks?
Answer:
"Absolutely. Any HDMI source is compatible with the wireless kit, so long as the resolution output is set to be 1080p or less."
Posted: 5th Sept, 2016
Question:
Hi, just wondering what is the differences between this unit and the cheaper unit that u have for sale, is it the ability to select from 2 sources ?
Answer:
"Yes. This model functions as a 2-input selector switch in addition to being a wireless sender/receiver kit. It also hand-shakes faster and has better performance overall which makes it more suitable for critical systems."
Posted: 16th July, 2024
Question:
Do either of the sender or receiver require separate power supply from DC or USB source?
Answer:
"The receiver must be connected to power via the included USB Cable. The sender module also comes supplied with a USB power cable however may not be required depending on signal strength."
Have a question about this product?
In-Stock 
