Welcome to one of the most serious pieces of kit we stock. This redefines versatility. This gives the term 'overkill' new meaning. It can easily place two 24" monitors side by side, and can even handle some 32" models if the weight and bezel are appropriate.
Each fully articulated swivel/tilt/rotate mounting head can take 8kg of weight, and at full stretch the articulated mounting arms have a span of 772mm centre to centre. For screens up to 660mm wide, perfect placement and angle for a single viewer is possible. Make no mistake, this is the product you've been waiting for!
This solution is also practical for those who need a dual screen solution for large, lightweight monitors, as the pole mount is modular and the lower level can be omitted without compromising on range of motion or safety. At full height, you're looking at 755mm of clearance from the desk to the top of the pole, or 355mm for running at half mast. Add some extra for your monitors, too! The same goes for width, as the full span can easily go over 1.4 metres!
Each screen can swivel 90 degrees left and right, tilt up and down 30 degrees and also rotate portrait/landscape through 180 degrees. Each of these adjustments can be left loose or tightened up for a solid mount. Add to this the dual-pivot extension arms which have a full range of motion including height adjustment, and your workspace will be utterly perfect! Also useful for back-to-back cubicles or advertising presentations.
Just compare your intended monitors with the specifications below to ensure a perfect fit, or feel free to ask us!
Please Note: Due to the size and weight of this item Express Delivery may not be available. Therefore additional delivery time will be required for all areas outside of the Brisbane / Gold Coast & Sunshine Coast metro range.
Special Note: You can upgrade the mounting hole spacing capacity of this mount with our Universal VESA Mount Adapter Plate - just be sure to keep the weight total per screen below 8kg including the extra 900g of the adapter.